Anchorages
The Anchorage Point is commonly referred to as a secure tie off point. It is the place where a worker anchors himself so that he can easily move around that point, and also holds on safely, incase he experiences a fall.
According to EN 795:2012, Anchor Devices have been classified into various types, names Type A, B, C, D and E. SB FALL PROTECTION offers a range of anchor devices which fall under various such types.

Details | SBAA111 |
---|---|
Usage | Extension |
Breaking Strength | 25 KN |
Webbing | High Tenacity Polyester |
Webbing Width | 44mm |
Stitching Thread | Polyester |
Size | Customized |
Standard | ANSI Z359.1 |
Comes With | Anchor Strap & One side D-ring, Other side Loop |

Details | SBAA211 |
---|---|
Usage | Extension |
Breaking Strength | 25 KN |
Webbing | High Tenacity Polyester |
Webbing Width | 44mm |
Stitching Thread | Polyester |
Size | Customized |
Standard | ANSI Z359.1 |
Comes With | Scaffoldhook Choker & One side D-ring |

Details | SBAA122 |
---|---|
Usage | Extension |
Breaking Strength | 25 KN |
Webbing | High Tenacity Polyester |
Webbing Width | 44mm |
Stitching Thread | Polyester |
Size | Customized |
Standard | ANSI Z359.1 |
Comes With | Anchor Strap & Both Side Loop |

Details | SBA222 |
---|---|
Usage | Extension |
Breaking Strength | 25 KN |
Webbing | High Tenacity Polyester |
Webbing Width | 80mm |
Stitching Thread | Polyester |
Size | Customized |
Standard | ANSI Z359.1 |
Comes With | Cross Arm Strap & Both side D-ring |

Details | SBA223 |
---|---|
Usage | Extension |
Breaking Strength | 25 KN |
Webbing | High Tenacity Polyester |
Webbing Width | 44mm |
Stitching Thread | Polyester |
Size | Customized |
Standard | ANSI Z359.1 |
Comes With | Anchor Strap & One side D-ring, Another side Loop |

SBA35100EAS |
---|
Made of 25mm wide Polyester Webbing |
Length : 0.6mtr., 1.0mtr. & 1.5mtr. or as requested |
Strength : Min 18 kN for 3 minutes |
Conforms to EN 795 : 2012 Type B |

SBA34100ES |
---|
Made of 44mm wide Polyester Webbing. |
Length : 1.07mtr. or as requested. |
Has a D-Ring at one end and textile loop at the other end. |
It comes with polyester tubular on the load-bearing face of the webbing, for abrasion resistance. |
Strength : Min 18 kN for 3 minutes. |
Conforms to EN 795 : 2012 Type B. |
*Length available as per request |

SBA36100WR |
---|
Made of PVC coated 8.0mm G. I. Wire Rope. |
The PVC coating allows protection of anchorage surfaces. |
Available Length : 1.0mtr., 1.5mtr., 1.8mtr. & 2.0mtr. or as requested |
Has steel thimbles at both ends to enable connection with all hardware. |
Minimum Breaking Strength : 5000lbs / 23kN |
Conforms to EN 795 : 2012 Type B |
*Length available as per request |

SBA400RA |
---|
The Steel Flaps each having 32 holes which can be fitted on the two sides of a structure by means of nails inserted in the holes. |
The Hinged Steel Roof Anchor has two Steel Hinged Flaps which can be nailed to the roof structure through various wide angles to provide a safe anchorage. |
It has a D-ring which allows movement over full work surface. |
Material: Galvanized Steel |
Minimum Breaking Strength: 23 kN |
Finish: Powder Coated or Zinc Plated |
Weight: 1.14kgs |
Conforms to: EN 795: 2012 Type A & ANSI Z 359.1: 2007 |

SBA31100AS |
---|
Anchor Strap Loop Disposable Concrete Anchor Point Strap is attached to a structure, capable of supporting 5000 lbs. |
1-3/4" x 4" loop to loop with full length tubular |
Orange strap. |
Various Lengths are available. |
Meets or Exceeds ANSI Z359.1-2007. |

SBA33100CAS |
---|
— it is a 3" wide cross arm strap. |
It comes with a large D-ring on one side and a small Dring on other side. |
It comes with orange and blue combination. |
Other colours are also available on requirement. |
Meets and or Exceeds ANSI Z359.1-2007 and OSHA. |

SBA32100AS |
---|
Disposable Concrete Anchor strap is attached to a structure, capable of supporting 5000 lbs. |
1-3/4” wide strap with a loop on one end, a large DRing or a loop on the other end. |
Variable length are available. |
It comes with a full length of tubular. |
Orange strap. |
Meets or Exceeds ANSI Z359.1-2007 and OSHA. |