Webbing (44mm) Restraint Lanyards
As far as webbing lanyards are concerned, SB. Fall Protection has a vast range of lanyards with a facility to customize as per specific requirements too.
- The Webbing Lanyards are available in lengths 1.0m, 1.5m, 1.8m, and 2.0m.
- The Webbing Lanyards in this section are made of 44mm wide high tenacity polyester webbing.
- The loops at the ends are protected by an abrasion resistant covering. This prevents the webbing from being damaged by the metallic contact of the connector.
- Variety of hooks and connectors are available for connection of both anchorage and termination end.
- All Lanyards with different combinations of connectors mentioned below are individually certified as per EN 354:2010.
- Minimum Breaking Strength of 23 kN.
| Ref. No. | Attachments | Lanyards |
|---|---|---|
| SBL221WL | Both Side Loop |  |
| SBL222WL | One Side Loop Other Side Karabiner |  |
| SBL223WL | Both Side Karabiner |  |
| SBL224WL | One Side Loop Other Side Snap Hook |  |
| SBL225WL | Both Side Snap Hook |  |
| SBL226WL | One Side Loop Other Side Scaffold Hook |  |
| SBL227WL | One Side Karabiner Other Side Snap Hook |  |
| SBL228WL | One Side Karabiner Other Side Scaffold Hook |  |
| SBL229WL | One Side Snap Hook Other Side Scaffold Hook |  |