Work Positioning System

SB FALL PROTECTION has a comprehensive and customized series of Work Positioning System. Work Positioning Lanyards can be connected to the Lateral D-Rings on the Work Positioning Belts or Combination Harnesses and easily adjusted for their lengths to suit the application.

  • All Work Positioning Lanyards and Belts are tested and CE certified as per EN 358:2018.
  • Breaking Strength min 15 kN.

SBH101WPB

SBH102WPB

SBH103WPB

Ref. No.Special FeaturesAdjustabilityCertified to
SBH101WPBAlloy Steel with Zinc Plating Buckle and D-rings. Tool Pocket on back side. Wide Comfort Pad, Fully AdjustableEN 358:2018
SBH102WPBPowder Coated Aluminium D-rings & Combination Buckle. Moisture Wicking & Breathable Padding.Two Lateral D-rings for Work Positioning. Tool holding Webbing Loops.EN 358:2018
SBH103WPBPowder Coated Aluminium D-rings & Quick Connect Buckle. Breathable mesh net on back side. Rings for Tool Holders, Bolt, Bags etc. Available in sizes- Medium, Large & Extra Large.EN 358:2018

SBL241WPL

SBL242WPL

SBL243WPL

SBL244WPL

DetailsSBL241WPLSBL242WPLSBL243WPLSBL244WPL
MATERIALMade of 12mm & 14mm dia Polyamide 3-strand Twisted RopeMade of 12mm & 14mm dia Polyamide 3-strand Twisted RopeMade of 12mm dia Polyamide Kernmantle RopeMade of 30mm Polyester Webbing
LENGTH 2.0 mtr., 3.0 mtr., & customized lengths are also available2.0 mtr., 3.0 mtr., & customized lengths are also available2.0 mtr., 3.0 mtr., & customized lengths are also available2.0 mtr., 3.0 mtr., & customized lengths are also available
ATTACHMENT ELEMENTSEasy to connect Steel Karabiners at both the ends for attachmentEasy to connect Steel Karabiners at both the free ends for attachmentEasy to connect Steel Karabiners at both the free ends for attachmentEasy to connect Steel Karabiners at both the ends for attachment
ADJUSTMENTManual Ring-Type Adjuster for work positioning & length adjustmentConvenient Rope-Grab Adjuster for easy length adjustment & work positioningConvenient Rope-Grab Adjuster for easy length adjustment & work positioningManual Ring-Type Adjuster for work positioning & length adjustment
CONFORMS TOEN 358:2018EN 358:2018EN 358:2018EN 358:2018
CUSTOMIZEDCan be customized as per requirementsCan be customized as per requirementsCan be customized as per requirementsCan be customized as per requirements

Account details will be confirmed via email.